Woodturning is a craft art in which wood is spun at high speeds and carved into attractive patterns and shapes. According to wikipedia,

"Woodturning is a form of woodworking that is used to create wooden objects on a lathe. Woodturning differs from most other forms of woodworking in that the wood is moving while a stationary tool is used to cut and shape it. Many intricate shapes and designs can be made by turning wood.

There are two distinct methods of turning wood: spindle turning and faceplate turning. In spindle turning, the wood is fixed between 2 points. The spur center digs in to the wood and is powered by a motor. The other a hard center or a live center may be a point or set of points in the tailstock. In face plate turning, the wood is secured with screws to a faceplate or in a chuck or jig. the tail stock and a center may also be used for added support on large pieces with a faceplate. Most bowls, platters and many vessels are face plate turned, while, Pens, furniture legs, spindles, and some vessels are spindle turned. The method used may differ depending on the shape of the blank an technique of the turner, and both methods may be used on the same piece.

The origin of woodworking dates to around 1300BC when the Egyptians first developed a two-person lathe. One person would turn the wood with a rope while the other used a sharp tool to cut shapes in the wood. The Romans improved the Egyptian design with the addition of a turning bow. Early bow lathes were also developed and used in Germany, France and Britain. In the Middle Ages a pedal replaced hand-operated turning, freeing both the craftsman's hands to hold the woodturning tools. The pedal was usually connected to a pole, often a straight-grained sapling. The system today is called the "spring pole" lathe (see Polelathe). Spring pole lathes were in common use into the early 20th Century. A two-person lathe, called a "great lathe", allowed a piece to turn continuously (like today's power lathes). A master would cut the wood while an apprentice turned the crank."